In order to find the correct replacement leaf springs for a trailer you first need to start by noting the type whether that be slipper or double eye. Then, you'll need to measure their unloaded length via jacking up the trailer. If the springs are worn they will measure longer than their replacement. Lastly, you will need to note the axle capacity which is found on the tag in the center of the beam. Please note, the number of leaves does not really denote capacity as leaves have different... view full answer...
The solution for your bike will be to use the Rhino-Rack Thru Axle Sleeve for 9-mm x 135-mm Thru Axle Skewers # RRRBCA039 with either the Multi Axle Adapter # RRRBCA030 or with the Thru Axle Bike Carrier # RR43233.
I personally like the bike carrier a little better. This is designed to be installed on the Pioneer Platforms but you can use different hardware to bolt this down if that's what you're needing. view full answer...
The Dexter 008-480-05 is specifically designed to fit AL-KO axles. Unfortunately, the # 8-407-5UC3-EZ will not fit AL-KO axles. Since these axles are no longer made replacement parts are not available. The best solution is to replace your 4,400 lb axle with a conventional axle.
The closest thing in capacity will be a 5,200 lb axle like the # e45GR which measures 86-1/2" long. You will need your hub face to hub face measurement to find the correct replacement. If the spring seat measurement... view full answer...
The MORryde CRE3000 equalizers, like part # MR27ZR, fit with 9/16" wet bolts so the bolts that come with the MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR46ZR will fit and you just need to compare the 2-1/4" shackles to what you currently have.
Measure from the center of one bolt hole on the shackles to the center of the other bolt hole and if this is 2-1/4" then you're good to go! If they measure longer than that, we also have the kit # MR76ZR which has the same parts just... view full answer...
The correct Solera RV Slide-Out Awning for a 2017 Keystone Cougar 28RKS can be found by measuring the slide-outs from the outside of each flange. If the flange to flange measurement for the larger slide is 149-1/2" then you'll need part # LCV000163299 for white or part # LCV000165061 for black. If the flange to flange measurement for the smaller slide is 49-1/8" then you'll need part # LCV000421394 (Black Only).
Please note, you don't have to add extra to the slide-out measurements as... view full answer...
The Lippert # LC432336 is designed to fit on a variety of trailers, but we don't have specific fit information for each individual trailer. The # LC432336 is designed to fit on trailers that do not have the 4 inches of clearance required to install the # LC373965, so you'll want to measure whether or not you've got the required 4" between the trailer and the bumper. Both of these brackets are designed to work with the Tailgate Storage System # LC243621. view full answer...
The correct Solera RV Slide-Out Awnings for a 2017 Keystone Cougar 28RKS is part # LCV000165061 for black or part # LCV000163299 for white for the big slide and part # LCV000168104 for black or part # LCV000163273 for white for the small slide. view full answer...
Go To Results